Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Circuit protection devicesDescription: Surge Suppressor PT 2-PE/S-24AC-ST76671+$941.449610+$908.416350+$904.2871100+$900.1580150+$893.5513250+$887.7705500+$881.98961000+$875.3830 -
![]()
Category: Panel instrumentDescription: NanoLine Communication Module (RS485 module) nLC-MOD-RS48578921+$389.820110+$379.650950+$371.8545100+$369.1427200+$367.1088500+$364.39711000+$362.70222000+$361.0073 -
![]()
Category: Classification of electronic componentsDescription: Bidirectional, Wireless, 2400MHz Transmission System, Comprising 2 Transceivers And Two Antennas With Connecting Cable5274 -
![]()
Category: Panel instrumentDescription: Conn Passive RS-485 T-Distributor 9/9/9POS ST50391+$1211.215510+$1200.204525+$1194.698950+$1189.1934100+$1183.6879150+$1178.1824250+$1172.6768500+$1167.1713 -
![]()
Category: solid state relayDescription: DIN The rail mounted optocoupler provides an ideal way for equipment input or output signals while ensuring electrical isolation between its own input and output. In other words, these optocouplers can protect equipment by electrically isolating the input, output, or both simultaneously. DC/AC type and AC/DC type also provide a method of connecting (simultaneously isolating) AC and DC control voltages. Provide DC input/DC output, DC input/AC output, and AC input/DC output types with switching speeds up to 100kHz. The 2.5kV AC input to output isolation LED status indicator module has a width of 6.2mm and operates within a temperature range of -20 to+60 ° C. Standard IEC 60 664, IEC 60 664A, DIN VDE 0110 Phoenix Contact82901+$357.748910+$348.416350+$341.2613100+$338.7727200+$336.9061500+$334.41751000+$332.86202000+$331.3066 -
![]()
Category: solid state relayDescription: PLC-PT Relays, actuator series, and sensor series, with plug-in terminal blocks (PIT), sensors or actuators can be directly connected to coupled relays without the need for additional modular terminal blocks for power (sensor version) or output (actuator version) PLCs and other peripheral devices. Fast plug-in connections are available, with gold-plated silver tin oxide terminals available in solid-state versions. They are ultra lightweight and can directly connect 0.34 mm2 wires without tools. All universal screwdrivers and operating levers can be used to connect small section airtight wire contacts of 0.14 mm2, which also comply with special standards, such as vibration testing. Compliant with train standard EN 50155 # # # interface relay69571+$177.351910+$172.725350+$169.1782100+$167.9445200+$167.0192500+$165.78541000+$165.01432000+$164.2432 -
![]()
Category: Classification of electronic componentsDescription: Terminal Block Interface Modules IB ST 24 DO16/33453 -
![]()
Category: Connector accessoriesDescription: Connector Accessories Pneumatic Module Housing Crimp 3POS Male/Female Blue18225+$25.386750+$24.3018200+$23.6942500+$23.54231000+$23.39042500+$23.21695000+$23.10847500+$22.9999 -
![]()
Category: Classification of electronic componentsDescription: PHOENIX CONTACT 2866514 Redundant module, new stabilized power supply45681+$421.741810+$410.739850+$402.3050100+$399.3711200+$397.1708500+$394.23691000+$392.40322000+$390.5696 -
![]()
Category: power relayDescription: PSR-TRISAFE-S The safety controller PSR-TRISAFE-S is an independent controller with 20 safety inputs, 4 safety outputs, and 2 safety ground switching outputs. If additional safety outputs or safety relay outputs are required, the standard safety relay expansion module can be hard wired to the safety outputs of the PSR-TRISAFE-S module. System designers should consider adding safety extension relays for two reasons: (a) the PSR-TRISAFE-S module does not have sufficient safety outputs; (b) A safety relay circuit is required to switch voltages other than 24V DC. The PSR-TRISAFE-S module is a 24V solid-state device. Intuitive 3-step software operation protection: password, used to defend against unauthorized changes in hardware and software security logic: defend against unwanted changes in security logic, press the CONFIRM button on the front of the device. All commonly used security functions can be easily and flexibly used: emergency stop and anti-theft door monitoring, non-contact switch, security sensor, laser scanner, optical equipment (mute or non mute), as well as security mode selection, start switch, dual hand control device 2 clock outputs, 4 alarm outputs, and ground conversion outputs, increasing the security of the monitoring circuit. # # # Recognized TUV FS, UL, cUL # # EN954-1 conforms to Class 4, ISO 13849-1 conforms to PLe, IEC 62061 conforms to SILC L 3, used for machine and system engineering SIL3 compliant with IEC 61508, for process industry # # # safety controllers5606 -
![]()
Category: industrial controlDescription: IB Direct insertion terminal block # # # Phoenix Contact system69121+$221.716610+$215.932650+$211.4983100+$209.9559200+$208.7992500+$207.25681000+$206.29282000+$205.3288 -
![]()
Category: Classification of electronic componentsDescription: Telecom & Ethernet Connectors FL MXT4270 -
![]()
Category: industrial controlDescription: TERMINAL INLINE 24VDC26701+$756.754810+$730.202050+$726.8829100+$723.5638150+$718.2532250+$713.6065500+$708.95981000+$703.6492 -
![]()
Category: industrial controlDescription: InlineThe controller can communicate through PROFINET and Modbus/TCP. Programming can be done using PC Worx Express or PC Worx (IEC 61131-3).98801+$3183.540810+$3154.599525+$3140.128950+$3125.6582100+$3111.1876150+$3096.7170250+$3082.2463500+$3067.7757 -
![]()
Category: I/OmoduleDescription: SMSSignal System SMS Remote Control and Signal System Installation on EN DIN Rail Installation Built in Equipment According to DIN43880/6 Analog or Digital Configurable Input 4 Relay Output Including SMS Relay, Antenna, Software, RS-232 Cable # # FL Series46101+$4430.519510+$4390.242125+$4370.103350+$4349.9646100+$4329.8259150+$4309.6872250+$4289.5484500+$4269.4097 -
![]()
Category: solid state relayDescription: PLC-The oscilloscope interface relay PLC-OSC series sensor interface includes PLC-BSC basic terminal block, with screw connection, push in connection solid-state relay and PLC-OSC series solid-state relay. Screw connection yellow LED indicator working temperature: -25 º C to 60 º C, also provides a wide range of accessories # # # Recognized cUL, GL, UL # # Standards IEC60664, EN50178, IEC62103 # # # Interface relay19311+$663.433310+$640.154950+$637.2451100+$634.3353150+$629.6796250+$625.6059500+$621.53221000+$616.8765 -
![]()
Category: Safety typeDescription: Multi-application Modular System - PSR-SPP Series This can be quickly and reliably assembled to form a tailor-made safety solution. To connect using TBUS correctly you will need one PSR-TBUS per module. For the last additional module use one PSR-TBUS-TP instead, this will close the feedback loop. The interface module is used for the connection of up to four safety sensors with NC/NO contacts to the safety relay PSR-SDC4, with screw connection. Quick system extension up to 10 modules, offering a safety system with up to 42 contacts Automatic identification of desired operating mode, no need to set switches or define parameters The system is based on a master relay (PSR-SDC) that monitors e-stops, guard doors (interlock or non-contact) and optical devices (e.g. light curtains) Safe cross-wiring with T-BUS renders the usual cross-wiring of supply voltage, enable signal and confirmation path redundant. Making commissioning and future expansion simple 24Vdc supply voltage Semiconductor output Depending on the wiring Safety category 2 or 4 can be maintained One or Two channel switches are used for control Note: The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP ### Configurable safety relay46251+$1312.983110+$1301.046925+$1295.078850+$1289.1107100+$1283.1426150+$1277.1745250+$1271.2064500+$1265.2383 -
![]()
Category: power relayDescription: Electromechanical Relay 120VDC 120VAC 6A 5PST-NO/DPST-NC( (22.5mm 114.5mm 99mm)) DIN Rail Safety Relay68001+$1161.100610+$1150.545125+$1145.267450+$1139.9897100+$1134.7120150+$1129.4342250+$1124.1565500+$1118.8788 -
![]()
Category: solid state relayDescription: Solid State Relay - Industrial Installation ELR 2+1-230AC/500AC-3785171+$3831.129510+$3796.301125+$3778.886850+$3761.4726100+$3744.0584150+$3726.6442250+$3709.2299500+$3691.8157 -
![]()
Category: power relayDescription: CONTACTRON - The solid-state contactor CONTACTRON has opened up new sales potential in the contactor technology segment market. The power level of today's mechanical contactors has a switching capacity of up to 20 kW. Solid state contactors have better switching performance: wear-resistant conversion, fast, accurate, and reliable. This means that they can provide the longest working life and system availability, and even maximize the cycle frequency. Wear free reverse three-phase AC motors can reach 575 V AC/3x37A - which is equivalent to a rated motor power of up to 18.5 kW. The integrated locking circuit and load wiring minimize the workload of wiring and installation. Throughout the entire working life of electronic solid-state contactors, their startup and shutdown are fast and accurate. CONTACTRON "1-phase Solid State Contactor" -660 V AC/50A CONTACTRON "3-phase Solid State Contactor" -575 V AC/3x37A (motor can reach 18.5 kW) # # # Contractron25581+$925.957010+$893.467350+$889.4061100+$885.3449150+$878.8469250+$873.1612500+$867.47551000+$860.9776 -
![]()
Category: power relayDescription: ELR W3 - solid-state reversing contactor 3-phase With current monitoring Right/left contactor Motor protection relay Emergency off switch contactor → category 3 Needs little space Less wiring time ### Standards IEC 60947-4-2, IEC 61508-1, EN 954-1, ISO 13849-193021+$1611.445010+$1596.795525+$1589.470850+$1582.1460100+$1574.8213150+$1567.4965250+$1560.1718500+$1552.8470 -
![]()
Category: solid state relayDescription: PLC-INTERFACESuitable for output functions, including PLC-BSC~/ACT base terminals, connected by screws, with plug-in micro solid state relays for installation on DIN rail NS 35/7.5, 1 normally open contact, input: 24 V DC, output: 24~253 V AC/0.75 A37711+$152.891410+$148.902950+$145.8451100+$144.7815200+$143.9838500+$142.92021000+$142.25542000+$141.5907 -
![]()
Category: solid state relayDescription: Solid State Relay - Industrial Installation PLC-OSP -12OUC/230AC/19504 -
![]()
Category: solid state relayDescription: DIN Rail Interface relay module, 100mA60591+$281.158910+$273.824350+$268.2011100+$266.2453200+$264.7783500+$262.82251000+$261.60002000+$260.3776 -
![]()
Category: power relayDescription: PHOENIX CONTACT 2967060 Universal relay, PLC series, interface, unlocked, DPDT, 24 VDC, 6 A65351+$57.054510+$53.7809100+$51.3491250+$50.9749500+$50.60081000+$50.17992500+$49.80585000+$49.5720 -
![]()
Category: Industrial Relay/UniversalDescription: PLC-RSC The appearance of the series PLC interface single pole and double pole relays and optocouplers is the same. This allows the module to be installed in any configuration with a universal bridging system and the same accessories. The V8 adapter can connect 8 relays or optocouplers to 15 D-SUB cables. Relays and optocouplers are used for input and output using insertable switching devices with four bridge slots, which can reduce wiring; Up to 80 module screws can be bridged to connect LED indicators and coil suppression diodes. The 250V version has a rated switching power size of 1500VA (width x thickness x height), 6.2 x 80 x 94 mm (single pole, double pole 14mm width), operating temperature range of -40 to+55 ° C, mechanical life (relay), 1 x 107 operations, and provides a wide range of accessories. Interface relay30711+$67.148510+$64.2290100+$63.7035250+$63.2948500+$62.65251000+$62.36052500+$61.95185000+$61.6015 -
![]()
Category: solid state relayDescription: PLC-RSC The appearance of the series PLC interface single pole and double pole relays and optocouplers is the same. This allows the module to be installed in any configuration with a universal bridging system and the same accessories. The V8 adapter can connect 8 relays or optocouplers to 15 D-SUB cables. Relays and optocouplers are used for input and output using insertable switching devices with four bridge slots, which can reduce wiring; Up to 80 modules can be bridged with screw terminal connections for LED indicators and coil suppression diodes. The 250V version has a rated switching power of 1500VA and dimensions (width x thickness x height) of 6.2 x 80 x 94 mm (single pole, double pole 14mm width). The operating temperature range is -40 to+55 ° C, and the mechanical life (relay) is 1 x 107 interface relay62621+$152.891410+$148.902950+$145.8451100+$144.7815200+$143.9838500+$142.92021000+$142.25542000+$141.5907 -
![]()
Category: power relayDescription: PHOENIX CONTACT 2966171 Universal relay, PLC series, interface, unlocked, SPDT, 24 VDC, 6 A28081+$36.973310+$34.8519100+$33.2760250+$33.0335500+$32.79111000+$32.51832500+$32.27595000+$32.1244
